|
 |
|
ACRYLIC SMOOTH RENDER 1,0 mm, 1,5 mm,
2,0 mm and 2,5 mm |
|
|
|
GENERAL
DESCRIPTION |
|
These exterior waterborne acrylic
ready-to-use renders can be rubbed in horizontal, vertical or
circular
direction until the desired furrowed and heavily grooved
surface or smooth scraped surface is achieved. They are
intended for the protection and decoration of the usual
exterior and interior wall surfaces. These are a durable
textured coating which provide an excellent weather and |
|
 |
|
|
|
ageing resistance, resistance to
the low and increased temperature and good resistance in
industrial and sea areas. They are free of ecologically
harmful
ingredients and good water vapour permeability, mildew and
algae resistant and water repellent. These renders are ideal
finish coatings for thermal insulation systems. Surfaces to be
finished, i.e. renders, concrete, fibre-cement and wood cement
surfaces, gypsum-cardboard plates must be clean, dry and
sound. Before rendering, apply a prime coat. Colour Range:
white, different shades on the colour chart PAINTS AND
PLASTERS (JUMIX System).
|
APPLICATION
|
|
Spread the ready-to-use plaster on
surfaces manually by a stainless steel trowel. Spraying
application is also possible. Trowel and level the spread
plaster using a stainless steel or plastic float. Application
Temperature: +5°C - +35°C. Drying Time: app. 6 hours (20°C,
65% R.H.),. Avoid application under direct sunlight and when
it is raining or freezing. Protect from rainfall for 24 hours.
|
|
COVERAGE |
|
Acrylic Smooth Render 1,0: app.
2,1 kg/m2
Acrylic Smooth Render 1,5: app. 2,9 kg/m2
Acrylic Smooth Render 2,0: app. 3,1 kg/m2
Acrylic Smooth Render 2,5: app. 5,0 kg/m2
|
|
STORAGE AND SHELF LIFE |
|
At least 12 months out of direct
sunlight. Protect from freezing. |
|
PACKAGING |
|
25 kg plastic container. |
|
|
|
